Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYCOLOY™ FR Resin CS9610 - Americas - (PC+ABS) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Cycoloy datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

CYCOLOY CS9610 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable low smoke, non chlorinated/brominated flame retardant grade. It has good mechanical and impact properties and has a UL94 V0@2.0mm and 5VB@2.0mm flame rating.

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	12	cm³/10min	ISO 1133
温度	260	°C	-
载荷	5	kg	-
熔体密度	1080	kg/m³	-
熔体	0.19	W/(m K)	-
熔体的比热	1860	J/(kg K)	-
喷射温度	120	°C	-
ASTM数据
熔融指数, MFI	15	g/10min	ASTM D 1238
温度	260	°C	-
负载	5	kg	-

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2400	MPa	ISO 527
屈服应力	62	MPa	ISO 527
屈服伸长率	4.8	%	ISO 527
断裂应力	50	MPa	ISO 527
断裂伸长率	45	%	ISO 527
弯曲模量	2500	MPa	ISO 178
简支梁缺口冲击强度, +23°C, 3mm	45	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C, 3mm	15	kJ/m²	ISO 179/1eA
悬臂梁缺口冲击强度, +23°C, 3mm	45	kJ/m²	ISO 180/1A
悬臂梁缺口冲击强度, -30°C, 3mm	15	kJ/m²	ISO 180/1A
ASTM数据
拉伸模量	2600	MPa	ASTM D 638
屈服应力	64	MPa	ASTM D 638
断裂拉伸强度	62	MPa	ASTM D 638
屈服伸长率	5	%	ASTM D 638
断裂伸长率	55	%	ASTM D 638
弯曲模量	2440	MPa	ASTM D 790
悬臂梁缺口冲击强度, 1/8 in	800	J/m	ASTM D 256

热性能	价值	单位	Test Standard
ISO数据
热变形温度, 1.80 MPa	106	°C	ISO 75-1/-2
维卡软化温度, B	124	°C	ISO 306
维卡软化温度, 120°C/h 50N	127	°C	ISO 306
线性热膨胀系数, 平行	69	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	74	E-6/K	ISO 11359-1/-2
ASTM数据
DTUL @ 66 psi	118	°C	ASTM D 648
DTUL @ 264 psi	105	°C	ASTM D 648

其它性能	价值	单位	Test Standard
密度	1220	kg/m³	ISO 1183
密度	1200	kg/m³	ASTM D 792

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	90	°C	-
预干燥-时间	4	h	-
加工湿度	≤0.04	%	-
注塑熔体温度	270 - 300	°C	-
模具温度	60 - 90	°C	-
加料温度	60 - 80	°C	-
1区	260 - 300	°C	-
2区	260 - 300	°C	-
3区	265 - 300	°C	-
螺杆转速	40 - 70	rpm	-
背压	0.3 - 0.7	MPa	-

函数

典型数据

加工方法

注塑

添加剂

阻燃剂

特殊性能

阻燃的

地区供应

北美

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.