Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Cosmoplene® FL7322 - PP - The Polyolefin Company (Singapore) Pte Ltd

Material Data Center offers the following functions for Cosmoplene® FL7322:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Cosmoplene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 其它性能 - 机械性能(薄膜)
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 10 g/10min ASTM D 1238
机械性能价值单位Test Standard
ASTM数据
断裂拉伸强度 37 MPa ASTM D 638
热性能价值单位Test Standard
ASTM数据
熔点 143 °C ASTM D 3418
光学特性价值单位Test Standard
ASTM数据
光泽度 139 - ASTM D 2457
雾度 2.4 % ASTM D 1003
其它性能价值单位Test Standard
密度 900 kg/m³ ASTM D 792
机械性能(薄膜)价值单位Test Standard
Other Standards[S]
拉伸模量, 平行 650 MPa TPC Method
拉伸模量, 垂直 640 MPa TPC Method
S: These properties are reported by the producer according standards that are different to our defaults.
典型数据
加工方法
薄膜挤出成型
添加剂
防结块剂
特征
共聚物
Certifications
可食品接触的, FDA 21 CFR认证
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.