Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CirculenRenew C14 LD3020K - (PE-LD) - LyondellBasell Industries

Material Data Center offers the following functions for CirculenRenew C14 LD3020K:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Circulen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 其它性能 - 机械性能(薄膜) - 加工推荐（挤出）
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 4 g/10min ISO 1133
温度 190 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 300 MPa ISO 527
屈服应力 13 MPa ISO 527
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 114 °C ISO 11357-1/-3
维卡软化温度, A 97 °C ISO 306
光学特性价值单位Test Standard
ASTM数据
光泽度 115 - ASTM D 2457
雾度 7 % ASTM D 1003
其它性能价值单位Test Standard
密度 928 kg/m³ ISO 1183
机械性能(薄膜)价值单位Test Standard
ISO数据
最大应力, 平行 20 MPa ISO 527-3
最大应力, 平行 17 MPa ISO 527-3
最大应变, 平行 350 % ISO 527-3
最大应变, normal 600 % ISO 527-3
动态摩擦系数 0.8 - ISO 8295
挤出形式 麓碌陇 - -
试样厚度 0.05 mm -
加工推荐（挤出）价值单位Test Standard
Type of extrusion blown - -
注塑熔体温度 150 - 190 °C -
典型数据
加工方法
注塑, 吹塑挤出成型, 薄膜挤出成型
供货形式
粒料
特征
可热封的, High Gloss
Certifications
生物相容, 回收树脂含量, 可食品接触的
应用
包装
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.