Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Armamid® PA6 GF 30-1THSM - PA6-GF30 - R&P Polyplastic

Material Data Center offers the following functions for Armamid® PA6 GF 30-1THSM:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Armamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明

This material displays high mechanical and electrical properties; resilient to hydrocarbons (kerosene, gasoline, benzene etc.), mineral and synthetic oils, strong and weak alkali, weak acids.

Available in natural and black colors.

加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 7 g/10min ISO 1133
温度 250 °C -
负载 2.16 kg -
模塑收缩率, 平行 0.2 % ISO 294-4, 2577
模塑收缩率, 垂直 0.8 % ISO 294-4, 2577
机械性能价值单位Test Standard
ISO数据
拉伸强度 140 MPa ISO 527
断裂伸长率 6 % ISO 527
简支梁冲击强度, +23°C 75 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 22 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 218 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 190 °C ISO 75-1/-2
热变形温度, 0.45 MPa 210 °C ISO 75-1/-2
线性热膨胀系数, 平行 30 E-6/K ISO 11359-1/-2
其它性能价值单位Test Standard
密度 1280 kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
注塑熔体温度 260 °C -
模具温度 80 °C -
典型数据
加工方法
注塑
特殊性能
经热稳处理的/耐热的
耐化学试剂
耐酸性, 耐碱性, 耐油性
应用
航天航空, 汽车, 电子电气
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.