Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ACRYREX CM-211 - PMMA - Chi Mei Corporation

Material Data Center offers the following functions for ACRYREX CM-211:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Acryrex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 光学特性 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 16 cm³/10min ISO 1133
温度 230 °C -
载荷 3.8 kg -
模塑收缩率, 平行 0.4 % ISO 294-4, 2577
ASTM数据
熔融指数, MFI 16 g/10min ASTM D 1238
温度 230 °C -
负载 3.8 kg -
模压收缩率, 平行 0.004 mm/mm ASTM D 955
机械性能价值单位Test Standard
ISO数据
屈服应力 65 MPa ISO 527
断裂应力 65 MPa ISO 527
弯曲模量, 23°C 2700 MPa ISO 178
弯曲强度 95 MPa ISO 178
简支梁缺口冲击强度, +23°C 2 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C 2 kJ/m² ISO 180/1A
ASTM数据
断裂拉伸强度 66.9 MPa ASTM D 638
弯曲强度 97.9 MPa ASTM D 790
洛克硬度 M 84 - ASTM D 785
悬臂梁缺口冲击强度, 1/4 in 19.8 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
热变形温度, 1.80 MPa 78 °C ISO 75-1/-2
维卡软化温度, A 103 °C ISO 306
维卡软化温度, B 96 °C ISO 306
线性热膨胀系数, 平行 60 E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 1.5 mm -
ASTM数据
UL94 燃烧性 HB - UL 94
测试厚度 1.59 mm -
维卡温度 103 °C ASTM D 1525
光学特性价值单位Test Standard
ASTM数据
光透射率 92 % ASTM D 1003
折射率 1.49 - ASTM D 542
其它性能价值单位Test Standard
密度 1190 kg/m³ ISO 1183
密度 1190 kg/m³ ASTM D 792
Bulk Density 700 kg/m³ -
加工推荐（注塑）价值单位Test Standard
预干燥-温度 70 - 75 °C -
预干燥-时间 4 h -
模具温度 30 - 50 °C -
加料温度 180 - 190 °C -
1区 195 - 215 °C -
喷嘴温度 190 - 210 °C -
典型数据
加工方法
注塑
应用
电子电气
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.