Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ZENITE® 16401 - LCP-MD30 - Celanese

Material Data Center offers the following functions for ZENITE® 16401:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Zenite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Механические свойства - Теплофизические свойства - Диаграммы
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта
Zenite® 16401 is a 30% mineral and PTFE filled Liquid Crystal Polymer for injection molding. It is well suited for low wear/ low friction applications.

Flammability @1.6mm nom. thickn.V-0UL recognition (1.6)
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Модуль упругости при растяжении 10000 МПа ISO 527
Напряжение при разрыве 100 МПа ISO 527
Удлинение при разрыве 2.3 % ISO 527
Ударная вязкость по Шарпи, +23°C 35 кДж/м2 ISO 179/1eU
Ударная вязкость по Шарпи с надрезом, +23°C 7 кДж/м2 ISO 179/1eA
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура плавления, 10°C/мин 330 °C ISO 11357-1/-3
Класс горючести при номинальной толщине 1.5 мм V-0 класс IEC 60695-11-10
Толщина образца 1.5 мм -
Диаграммы
Напряжение - удлинение , ZENITE® 16401, LCP-MD30, Celanese
Секущая модуля упругости - удлинение , ZENITE® 16401, LCP-MD30, Celanese
Особые свойства и характеристики
Добавки
Смазочные добавки
Специальные характеристики
Трибологический сорт
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.