Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of XYRON™ 540V - (PPE+PS) - Asahi Kasei

Material Data Center offers the following functions for XYRON™ 540V:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Xyron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
предел прочности при растяжении 60 МПа ISO 527
Модуль упругости при изгибе, 23°C 2430 МПа ISO 178
Предел прочности при изгибе 98 МПа ISO 178
Ударная вязкость по Шарпи с надрезом, +23°C 18 кДж/м2 ISO 179/1eA
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Температура изгиба под нагрузкой, 1.80 МПа 114 °C ISO 75-1/-2
Коэффициент линейного теплового расширения, параллельный 70 E-6/K ISO 11359-1/-2
Класс горючести при толщине образца h V-1 класс IEC 60695-11-10
Толщина образца 0.7 мм -
Данные ASTM
Температура прогиба под нагрузкой (264 фунт/дюйм2) 120 °C ASTM D 648
Электрические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Относительная диэлектрическая проницаемость, 100Гц 2.9 - IEC 62631-2-1
Относительная диэлектрическая проницаемость, 1МГц 2.9 - IEC 62631-2-1
Коэффициент диэлектрических потерь, 100 Гц 3 E-4 IEC 62631-2-1
Коэффициент диэлектрических потерь, 1 MГц 4 E-4 IEC 62631-2-1
Удельное объемное сопротивление >1E13 Ом*м IEC 62631-3-1
Удельное поверхностное сопротивление >1E15 Ом IEC 62631-3-2
Электрическая прочность 29 кВ/мм IEC 60243-1
Прочие свойстваЗначениеЕдиницаСтандарт
Водопоглощение 0.1 % Sim. to ISO 62
Плотность 1090 кг/м³ ISO 1183
Рекомендации по переработке литьем под давлениемЗначениеЕдиницаСтандарт
Температура предварительной сушки 90 - 100 °C -
Время предварительной сушки 2 - 4 h -
Температура расплава 50 - 80 °C -
Температура формы 240 - 300 °C -
Особые свойства и характеристики
Способы переработки
Литье под давлением
Особые показатели
Огнестойкий
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана, Латинская Америка, Ближний Восток и Африка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.