Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tufprene™ 126S - TPS - Asahi Kasei

Material Data Center offers the following functions for Tufprene™ 126S:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tufprene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Технологические и физические свойства - Механические свойства - Прочие свойства
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Технологические и физические свойстваЗначениеЕдиницаСтандарт
Данные ISO
Показатель текучести расплава, ПТР 4.5 г/10 мин ISO 1133
Температура 190 °C -
Нагрузка 2.16 kg -
Механические свойстваЗначениеЕдиницаСтандарт
Данные ISO
предел прочности при растяжении 25 МПа ISO 37
Твердость по Шору А 91 - ISO 7619-1
Other Standards[S]
Напряжение при 300%-ном растяжении 4.5 МПа ISO 37
S: These properties are reported by the producer according standards that are different to our defaults.
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 950 кг/м³ ISO 1183
Особые свойства и характеристики
Вид поставки
Гранулы, Порошок
Специальные характеристики
Смеси полимерных материалов, Сополимер
Сертификаты
Контакт с пищей, Одобрен для контакта с пищей FDA 21 CFR
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана, Ближний Восток и Африка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.