Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Sarlink® 6765N - TPV - Teknor Apex Co.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Sarlink datasheets, application examples or technical articles are available in Material Data Center
Preliminary Data
SARLINK TPV 6765N is a high performance thermoplastic vulcanizate used in automotive applications including interior trim. Sarlink TPV 6765N is a medium hardness, low density grade, available in Nat or can be color-matched with good color stability, exhibiting good UV resistance. This grade is designed for injection molding but could also be extruded. This grade has been approved for GM's GMW 15816 TPV Type 5 specifications and Chrysler's MS-AR-100 BMV2 specifications.
Property | Value | Unit | Standard |
---|---|---|---|
Tensile properties (Cross Flow Direction) | ISO 37 | ||
Tensile strength at break | 5,5 | MPa | |
Modulus at 100% elongation | 2,1 | MPa | |
Elongation at break | 660 | % | |
Apparent shear viscosity @ 206 1/s, 200°C | 230 | Pa.s | ISO 11443 Capillary |
Механические свойства | Значение | Единица | Стандарт | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Данные ISO | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Остаточной деформации сжатия при 70°C, 24h | 36 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Твердость по Шору А | 70 | - | ISO 7619-1 |
Прочие свойства | Значение | Единица | Стандарт |
Плотность | 915 | кг/м³ | ISO 1183 |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.