Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EVATHENE® UE639-04 - EVAC - USI Corporation

Material Data Center offers the following functions for EVATHENE® UE639-04:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Evathene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Технологические и физические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Показатель текучести расплава, ПТР 150 г/10 мин ASTM D 1238
Механические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Предел прочности 3.9 МПа ASTM D 638
Относительное удлинение при разрыве 800 % ASTM D 638
Твердость по Шору А 67 - ASTM D 2240
Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Температура плавления 67 °C ASTM D 3418
Температура размягчения по Вика 40 °C ASTM D 1525
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 945 кг/м³ ASTM D 792
Особые свойства и характеристики
Специальные характеристики
Хорошая адгезия (приклеивание), Термостойкость, Сополимер
Доступность материала по регионам
Страны Азии и Тихого океана
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.