Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Embrace™ LV - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Embrace™ LV:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Embrace datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Теплофизические свойства - Оптические свойства - Прочие свойства - Свойства пленки
Любая форма использования представленной информации должна осуществляться на основании заявленных условий и с учетом отсутствия ответственности создателей системы.
Описание продукта

The world's leading shrink film just got better with the introduction of Eastman Embrace™ LV to the Eastman Embrace™ family of resins. LV stands for LOW shrink force and VERSATILE shrink curve. Living up to its name, it

demonstrates its versatility with its ability to be produced with 40 to 50% reduction in shrink force, compared with other polyester shrink films and with a shrink curve that is similar to both PVC and OPS while still maintaining ultimate shrinkage greater than 75%. This versatility is achieved by making changes to the extruders

manufacturing process. Eastman Embrace™ LV emulates all visually satisfying attributes expected from the current Eastman Embrace™ such as high gloss and clarity.




Теплофизические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Температура стеклования 69 °C ASTM E 1356
Температура размягчения по Вика 69 °C ASTM D 1525
Оптические свойстваЗначениеЕдиницаСтандарт
Данные ASTM
Блеск 161 - ASTM D 2457
Мутность 1.4 % ASTM D 1003
Пропускание света 92 % ASTM D 1003
Прочие свойстваЗначениеЕдиницаСтандарт
Плотность 1300 кг/м³ ASTM D 792
Свойства пленкиЗначениеЕдиницаСтандарт
ASTM Data
Модуль упругости при растяжении, продольный 1900 МПа ASTM D 882
Модуль упругости при растяжении, поперечный 1900 МПа ASTM D 882
Предел прочности, продольный 51 МПа ASTM D 882
Предел прочности, поперечный 50 МПа ASTM D 882
Относительное удлинение при разрыве, продольный 4 % ASTM D 882
Относительное удлинение при разрыве, поперечный 4 % ASTM D 882
Толщина образца 0.25 мм -
Особые свойства и характеристики
Способы переработки
Пленочная экструзия
Особые показатели
Прозрачный
Специальные характеристики
Bысокоглянцевый , Сополимер
Сертификаты
Контакт с пищей
Применение
Медицинского назначения, Упаковка
Доступность материала по регионам
Северная Америка, Европа, Страны Азии и Тихого океана, Латинская Америка, Ближний Восток и Африка
Дискламация
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Создан: Источник: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.