Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® R533T - PA66-GF33 - Ascend

Material Data Center offers the following functions for Vydyne® R533T:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Vydyne R533T is a translucent 33% glass-fiber reinforced PA66 resin designed specifically for use in power-steering reservoirs and other applications where chemical resistance, whiteness and transmittance are required. R533T offers standard flow and maintains the excellent resistance typical of PA66 in chemicals, machine and motor oils, solvents, and gasoline.
Características de processamento/físicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Contração após a moldagem, paralelo 0.4 / * % ISO 294-4, 2577
Contração após a moldagem, perpendicular 0.9 / * % ISO 294-4, 2577
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 10200 / 7900 MPa ISO 527
Tensão na ruptura 210 / 150 MPa ISO 527
Deformação na ruptura 4 / 6 % ISO 527
Resistência ao impacto Charpy , +23°C N / 90 kJ/m² ISO 179/1eU
Resistência ao impacto Charpy, -30°C N / 85 kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 12 / 14 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 8 / 12 kJ/m² ISO 179/1eA
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 264 / * °C ISO 11357-1/-3
Temperatura de deflexão térmica, 1.80 MPa 235 / * °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 252 / * °C ISO 75-1/-2
Coef. de expansão térmica linear, paralelo 21 / * E-6/K ISO 11359-1/-2
Coef. de expansão térmica linear, perpend. 110 / * E-6/K ISO 11359-1/-2
Flamabilidade a 1.5mm esp. nom. HB / * class IEC 60695-11-10
Espessuras do tubo de teste 1.5 / * mm -
Flamabilidade a espessura h HB / * class IEC 60695-11-10
Espessuras do tubo de teste 0.8 / * mm -
Propriedades elétricasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Resistividade volumétrica específica 1E12 / - Ohm*m IEC 62631-3-1
Resistência elétrica 20 / - kV/mm IEC 60243-1
Índice comparativo de linha de fuga 600 / - - IEC 60112
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 0.8 / * % Sim. to ISO 62
Absorção de umidade 1.8 / * % Sim. to ISO 62
Densidade 1400 / - kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos, Cor natural
Características especiais
Translucent
Resistência Química
Resistência química geral, Resistência aos solventes, Resistência a óleos
Aplicaciones
Automóvel
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.