Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAMID® LX9012 - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAMID® LX9012:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Heat stabilized and light resistant polyamide 12 compound

VESTAMID® LX9012 has been especially developed for the extrusion and co-extrusion of ski upper and decorative films. Decoration on the bottom side of injection molded sports shoe soles is a further application field.

Films made of VESTAMID® LX9012 feature high transparency, good screen and sublimation printing, outstanding scratch resistance, and excellent impact strength at low temperatures. The semi-crystalline compounds based on PA 12 absorb only low quantities of water.

Therefore, molded parts show excellent dimensional stability, constantly high impact strength, low coefficient of friction and good chemical resistance at changing ambient humidity. VESTAMID® LX9012 is supplied as cylindrical granules, ready for processing in moisture-proof packaging.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

For information about processing of VESTAMID®, please follow the general commendations about “Processing of VESTAMID® compounds”. 

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM
OR VISIT OUR PRODUCT AT  WWW.VESTAMID.COM
Características de processamento/físicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Contração após a moldagem, paralelo 1.3 / * % ISO 294-4, 2577
Contração após a moldagem, perpendicular 1.3 / * % ISO 294-4, 2577
Propriedades mecânicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1100 / - MPa ISO 527
Tensão no escoamento 34 / - MPa ISO 527
Deformação no escoamento 5 / - % ISO 527
Deformação nominal na ruptura >50 / - % ISO 527
Resistência ao impacto Charpy , +23°C N / - kJ/m² ISO 179/1eU
Resistência ao impacto Charpy, -30°C N / - kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 13 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Res. impacto Charpy c/entalhe, -30°C 15 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
Dureza Shore D 71 / * - ISO 7619-1
Propriedades térmicasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 176 / * °C ISO 11357-1/-3
Temp. de transição vítrea, 10°C/min 39 / * °C ISO 11357-1/-2
Temperatura de deflexão térmica, 1.80 MPa 45 / * °C ISO 75-1/-2
Temperatura de deflexão térmica, 0.45 MPa 120 / * °C ISO 75-1/-2
Temperatura de amolecimento Vicat, B 130 / * °C ISO 306
Coef. de expansão térmica linear, paralelo 130 / * E-6/K ISO 11359-1/-2
Coef. de expansão térmica linear, perpend. 125 / * E-6/K ISO 11359-1/-2
Flamabilidade a 1.5mm esp. nom. HB / * class IEC 60695-11-10
Espessuras do tubo de teste 1.6 / * mm -
Propriedades elétricasSeco / CondUnidadeMétodo de ensaio
ISO Dados
Constante dielétrica, 100Hz 3.8 / - - IEC 62631-2-1
Constante dielétrica, 1MHz 3 / - - IEC 62631-2-1
Fator de dissipação dielétrica, 100Hz 530 / - E-4 IEC 62631-2-1
Fator de dissipação dielétrica, 1MHz 280 / - E-4 IEC 62631-2-1
Resistividade volumétrica específica 1E12 / - Ohm*m IEC 62631-3-1
Índice comparativo de linha de fuga 575 / - - IEC 60112
Outras propriedadesSeco / CondUnidadeMétodo de ensaio
Absorção de água 1.5 / * % Sim. to ISO 62
Absorção de umidade 0.8 / * % Sim. to ISO 62
Densidade 1010 / - kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção, Extrusão de laminas, Extrusão de perfis, Outros tipos de extrusão
Forma de entrega
Granulos
Características especiais
Alto impacto., Estável a luz, Estável contra o calor, Transparente
Características
Resistente a riscos, Grau tribológico
Resistência Química
Resistência química geral
Aplicaciones
Equipo deportivo
Disponibilidade regional
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.