Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TYMAX™ GT7001 - EMA - Westlake Chemical Corp.

Material Data Center offers the following functions for TYMAX™ GT7001:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tymax datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Extrusão
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Applications.
Extrusion coating
Laminations
Tie-layer

TYMAX® GT7001 is a maleic anhydride modified ethylene methyl acrylate copolymer designed for use as a tie layer in extrusion coating and lamination applications. This resin is designed for bonding to polyolefins, polyamides, and PET in multilayer film structures. It does not contain any slip or antiblock additives.
This product has some 21 CFR clearances.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Índice de fluidez, MFI 6 g/10min ASTM D 1238
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
Temperatura de fusão 84 °C ASTM D 3418
Temperatura de amolecimento Vicat 51 °C ASTM D 1525
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 942 kg/m³ ASTM D 792
Recomendação de processamento ExtrusãoValorUnidadeMétodo de ensaio
Temperatura da massa <330 °C -
Características
Processamento
Revestimento
Características
Copolímero
Certifications
Contacto com alimentos, Aprovação de alimentos FDA 21 CFR
Disponibilidade regional
América do Norte, Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.