Any use of this information falls under the rules of our
disclaimer.
Características de processamento/físicas | Valor | Unidade | Método de ensaio |
Other Standards[S] |
Índice de fluidez, MFI |
6 |
g/10min |
ASTM D 3307 |
Temperatura |
372 |
°C |
- |
Carga |
5 |
kg |
- |
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriedades mecânicas | Valor | Unidade | Método de ensaio |
ASTM Dados |
Módulo de flexão |
440 |
MPa |
ASTM D 790 |
Dureza Shore D |
60 |
- |
ASTM D 2240 |
Other Standards[S] |
Resistência à tração |
33 |
MPa |
ASTM D 3307 |
Resistência à tração no escoamento |
15 |
MPa |
ASTM D 3307 |
Deformação na ruptura |
430 |
% |
ASTM D 3307 |
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriedades térmicas | Valor | Unidade | Método de ensaio |
ASTM Dados |
Coeficiente de expansão térmica, long. |
140 |
E-6/K |
ASTM D 696 |
Índice de oxigênio |
95 |
% |
ASTM D 2863 |
Other Standards[S] |
Max. Service Temp., Intermittent |
260 |
°C |
- |
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriedades elétricas | Valor | Unidade | Método de ensaio |
ASTM Dados |
Resistência elétrica, tempo curto |
80 |
kV/mm |
ASTM D 149 |
Fator de dissipação dielétrica, 1 MHz |
0.0001 |
- |
ASTM D 150 |
Constante dielétrica, 1 MHz |
2.03 |
- |
ASTM D 150 |
Resistividade volumétrica específica |
1E18 |
Ohm*cm |
ASTM D 257 |
Outras propriedades | Valor | Unidade | Método de ensaio |
Absorção de água, 24hr |
0.03 |
% |
ASTM D 570 |
Densidade |
2150 |
kg/m³ |
ASTM D 792 |
Características
Processamento
Rotomoldagem
Forma de entrega
Pó
Características especiais
Estabilidade a raios U.V./Intempéries
Características
Baixa fumaça, Estabilidade térmica
Resistência Química
Resistência química geral, Resistência aos solventes
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com