Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Teflon™ PFA 440HPA - PFA - The Chemours Company

Material Data Center offers the following functions for Teflon™ PFA 440HPA:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Teflon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
Other Standards[S]
Índice de fluidez, MFI 16 g/10min ASTM D 3307
S: These properties are reported by the producer according standards that are different to our defaults.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Módulo de flexão 590 MPa ASTM D 790
Dureza Shore D 55 - ASTM D 2240
Other Standards[S]
Resistência à tração 25 MPa ASTM D 3307
Deformação na ruptura 300 % ASTM D 3307
S: These properties are reported by the producer according standards that are different to our defaults.
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
UL94 flamabilidade V-0 - UL 94
Índice de oxigênio 95 % ASTM D 2863
Other Standards[S]
Temperatura de fusão 305 °C ASTM D 4591
Max. Service Temp., Continous 260 °C -
S: These properties are reported by the producer according standards that are different to our defaults.
Propriedades elétricasValorUnidadeMétodo de ensaio
ASTM Dados
Resistência elétrica, tempo curto 80 kV/mm ASTM D 149
Fator de dissipação dielétrica, 1 MHz 0.0002 - ASTM D 150
Constante dielétrica, 1 MHz 2.03 - ASTM D 150
Resistividade volumétrica específica 1E18 Ohm*cm ASTM D 257
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água, 24hr 0.03 % ASTM D 570
Densidade 2150 kg/m³ ASTM D 792
Características
Processamento
Moldagem por injeção, Outros tipos de extrusão, Moldagem por transferência, Moldagem por compressão
Forma de entrega
Granulos
Características especiais
Estabilidade a raios U.V./Intempéries, Estável contra o calor
Características
Good Drawdown, Baixa fumaça, Resistência de derreta, Estabilidade térmica, Grau tribológico
Resistência Química
Resistência química geral
Certifications
Contacto com alimentos, Aprovação para contacto com alimentos10/2011, Aprovação de alimentos FDA 21 CFR
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.