Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Silopren® LSR 2070 - VMQ - Momentive Performance Materials Inc.

Material Data Center offers the following functions for Silopren® LSR 2070:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Silopren datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Appearance/Color:
liquid, transparent

Conformity:
The product meets the requirements for passing the test standards USP Class VI, European Pharmacopeia, FDA 21 CFR 177.2600 and ISO 10993.
Based on listing of ingredients in the BfR recommendation XV "Silicones", the product is compositionally compliant.

These values were determined with the following conditions:
Vulcanization: 10 min / 175°C + 4 hrs 200°C post cure.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Resistência à tração 9 MPa ISO 37
Deformação na ruptura 400 % ISO 37
Dureza Shore A 70 - ISO 7619-1
ASTM Dados
Resistência ao rasgamento 20 kN/m ASTM D 624
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Flamabilidade a 1.5mm esp. nom. HB class IEC 60695-11-10
Cartão Amarelo (yellow card) disponível sim - -
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1140 kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção
Características especiais
Transparente
Certifications
Contacto com alimentos, Aprovação para contacto com alimentos BfR, Aprovação de alimentos FDA 21 CFR, Contato com água potável, Contato com água potável KTW, Contato com água potável DVGW W270, USP Class VI
Aplicaciones
Polivalente
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.