Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Lupolen 2420H - (PE-LD) - LyondellBasell Industries

Material Data Center offers the following functions for Lupolen 2420H:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lupolen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 1.9 g/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 260 MPa ISO 527
Tensão no escoamento 11 MPa ISO 527
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 111 °C ISO 11357-1/-3
Temperatura de amolecimento Vicat , A 94 °C ISO 306
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Brilho 50 - ASTM D 2457
Haze 8 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 924 kg/m³ ISO 1183
Propriedades do filmeValorUnidadeMétodo de ensaio
ISO Dados
Deformação Máxima, paralelo 250 % ISO 527-3
Deformação Máxima, perpend. 600 % ISO 527-3
Coeficiente dinâmico de atrito 0.8 - ISO 8295
Tipo de extrusão blown - -
Espessura de corpo de prova 0.05 mm -
Recomendação de processamento ExtrusãoValorUnidadeMétodo de ensaio
Type of extrusion blown - -
Temperatura da massa 160 - 200 °C -
Características
Processamento
Extrusão de filme soprado, Extrusão de laminas
Forma de entrega
Granulos
Características
Heat Sealable
Certifications
Contacto com alimentos
Aplicaciones
Polivalente, Embalaje
Disponibilidade regional
Europa, Ásia Pacífico, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.