Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ERACLENE® MR 80 U - (PE-HD) - Versalis S.p.A

Material Data Center offers the following functions for ERACLENE® MR 80 U:
unit conversion, PDF datasheet print, comparison with other plastics, flow length calculation, snap fit calculation, beam deflection calculation, cooling time calculation, parameters for material models, CAE Interfaces

Check here, which other Eraclene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Informação do produto
Eraclene MR 80 U is a high density polyethylene with antioxidants, suitable for injection moulding application.
Eraclene MR 80 U shows a good balance between processability and mechanical properties.

Applications
The grade is specifically designed for houseware and thin-walled containers.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 18 cm³/10min ISO 1133
Temperatura 190 °C -
Carga 2.16 kg -
Densidade do fundido 733 kg/m³ -
Condutividade térmica do fundido 0.32 W/(m K) -
Capacidade térmica específica do fundido 3180 J/(kg K) -
Temperatura de ejeção 100 °C -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1250 MPa ISO 527
Tensão no escoamento 27 MPa ISO 527
Deformação no escoamento 10.5 % ISO 527
Deformação nominal na ruptura >50 % ISO 527
Dureza Shore D 65 - ISO 7619-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de fusão, 10°C/min 132 °C ISO 11357-1/-3
Temp. de transição vítrea, 10°C/min 115 °C ISO 11357-1/-2
Coef. de expansão térmica linear, paralelo 152 E-6/K ISO 11359-1/-2
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 954 kg/m³ ISO 1183
Diagrama
Viscosidade - taxa de cisalhamento , ERACLENE® MR 80 U, (PE-HD), Versalis
Tensão de cisalhamento - taxa de cisalhamento , ERACLENE® MR 80 U, (PE-HD), Versalis
Volume específico - temperatura (pvT) , ERACLENE® MR 80 U, (PE-HD), Versalis
Características
Processamento
Moldagem por injeção
Forma de entrega
Granulos
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Outras informações
Moldagem por injeção
#2
Typical processing temperature range:

    Melt temperature         190 - 260 °C

    Mold temperature          10-  40  °C

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.