Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® C 88 A - (TPU-ARES) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Propriedades mecânicas - Propriedades elétricas - Outras propriedades - Diagrama

Any use of this information falls under the rules of our disclaimer.

Informação do produto

DESCRIPTION
Elastollan C 88 A is a polyester based TPU

SPECIAL PROPERTIES
high tensile strength, excellent tear strength,
very good damping behavior, good rebound elasticity,
very good wear performance, good flexibility at low temperature and
resistance to hydrolysis

TYPICAL APPLICATIONS
round beltings

OTHER HINTS
predrying: 2-3h at 100-110°C (air circulating oven)
or 80-90°C (dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

Propriedades mecânicas	Valor	Unidade	Método de ensaio
ISO Dados
Tensão em 100% de alongamento	6	MPa	ISO 527
Tensão em 300% de alongamento	13	MPa	ISO 527
Tensão na Ruptura TPE	50	MPa	ISO 527
Deformação na Ruptura TPE	>300	%	ISO 527
Deformação permanente por compressão a 23°C, 24h	25	%	ISO 815
Deformação permanente por compressão a 70°C, 24h	40	%	ISO 815
Resistência ao rasgamento	75	kN/m	ISO 34-1
Resistência à abrasão	30	mm³	ISO 4649
Dureza Shore A	88	-	ISO 7619-1
Dureza Shore D	37	-	ISO 7619-1

Propriedades elétricas	Valor	Unidade	Método de ensaio
ISO Dados
Índice comparativo de linha de fuga	600	-	IEC 60112

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1190	kg/m³	ISO 1183

Diagrama

Características

Processamento

Extrusão de perfis

Forma de entrega

Granulos

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Outras informações

Extrusão de perfis

Barrel temperature : 160 - 190 °C

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.