Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Elastollan® C 75 A HPM - (TPU-ARES) - BASF Polyurethanes GmbH

Check here, which other Elastollan datasheets, application examples or technical articles are available in Material Data Center

Propriedades mecânicas - Outras propriedades - Diagrama

Any use of this information falls under the rules of our disclaimer.

Informação do produto

DESCRIPTION
Elastollan C 75 A HPM is a polyester based TPU

SPECIAL PROPERTIES
high tensile strength, excellent tear strength,
very good damping behavior, good rebound elasticity,
very good wear performance, good flexibility at low temperature and
resistance to hydrolysis, improved heat distortion temperature

TYPICAL APPLICATIONS
technical parts, sealing bellows
OTHER HINTS
predrying: 2-3h at ca. 80°C (dehumidified air dryer),
max. content of humidity before processing: 0,02%
annealing: 20 h at 100°C in order to get optimum properties

CHEMICAL RESISTANCE
For detailed information on the chemical resistance of our
materials refer to this list of chemical resistance

Propriedades mecânicas	Valor	Unidade	Método de ensaio
ISO Dados
Tensão em 300% de alongamento	6	MPa	ISO 527
Tensão na Ruptura TPE	50	MPa	ISO 527
Deformação na Ruptura TPE	>300	%	ISO 527
Deformação permanente por compressão a 23°C, 24h	25	%	ISO 815
Deformação permanente por compressão a 70°C, 24h	35	%	ISO 815
Deformação permanente por compressão a 100°C, 24h	50	%	ISO 815
Resistência ao rasgamento	45	kN/m	ISO 34-1
Resistência à abrasão	50	mm³	ISO 4649
Dureza Shore A	75	-	ISO 7619-1

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1180	kg/m³	ISO 1183

Diagrama

Características

Processamento

Moldagem por injeção, Extrusão de perfis, Moldagem por sopro

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.