Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Eastar™ AN004 - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Eastar™ AN004:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Eastar datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades ópticas - Outras propriedades - Recomendação de processamento Extrusão
Any use of this information falls under the rules of our disclaimer.
Informação do produto

Eastar™ AN004 copolyester contains a mold release. It has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but AN004 maintains its physical properties when

exposed to these oils, and its appearance is virtually unchanged. Easy to process, it flows readily and fills intricate molds. Its processability coupled with its outstanding chemical resistance makes it well suited for thick-wall applications.




Características de processamento/físicasValorUnidadeMétodo de ensaio
ASTM Dados
Contração após a moldagem, paralelo 0.004 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 1800 MPa ISO 527
Tensão no escoamento 47 MPa ISO 527
Deformação no escoamento 4 % ISO 527
Tensão na ruptura 46 MPa ISO 527
Deformação na ruptura 200 % ISO 527
Módulo de flexão, 23°C 1850 MPa ISO 178
Impacto Izod com entalhe, +23°C 7.8 kJ/m² ISO 180/1A
Impacto Izod com entalhe 4.8 kJ/m² ISO 180/1A
Temperatura -40 °C -
ASTM Dados
Resistência à tração no escoamento 47 MPa ASTM D 638
Resistência à tração na ruptura 51 MPa ASTM D 638
Alongamento no escoamento 5 % ASTM D 638
Deformação na ruptura 320 % ASTM D 638
Módulo de flexão 2000 MPa ASTM D 790
Dureza Rockwell 103 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 80.1 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 40 J/m ASTM D 256
Temperatura -40 °C -
Resistência ao Impacto Izod, 1/8 in N J/m ASTM D 256
Propriedades térmicasValorUnidadeMétodo de ensaio
ASTM Dados
DTUL @ 66 psi 73 °C ASTM D 648
DTUL @ 264 psi 65 °C ASTM D 648
Propriedades ópticasValorUnidadeMétodo de ensaio
ASTM Dados
Haze 0.3 % ASTM D 1003
Transmitância luminosa 91 % ASTM D 1003
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1200 kg/m³ ASTM D 792
Recomendação de processamento ExtrusãoValorUnidadeMétodo de ensaio
Pré-secagem - temperatura 70 °C -
Pré-secagem - tempo 3 h -
Temperatura da massa 230 - 280 °C -
Temperatura do molde 15 - 30 °C -
Características
Processamento
Outros tipos de extrusão
Forma de entrega
Cor natural
Aditivos
Desmoldante
Características especiais
Alto impacto., Transparente
Características
Propriedades de barreira, High Gloss, Copolímero
Resistência Química
Resistência química geral, Resistência a óleos
Aplicaciones
Embalaje
Disponibilidade regional
América do Norte, Europa, Ásia Pacífico, America Centra e do Sul, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.