Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Desmovit® DP R 9920 - TPU-GF20 - geba Kunststoffcompounds GmbH

Material Data Center offers the following functions for Desmovit® DP R 9920:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Desmovit datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Tensão na ruptura 59 MPa ISO 527
Deformação na ruptura 14.5 % ISO 527
Módulo de flexão, 23°C 2000 MPa ISO 178
Módulo de flexão 3500 MPa ISO 178
Módulo de flexão - Temperatura -30 °C -
Resistência ao impacto Charpy, +23°C N kJ/m² ISO 179/1eU
Resistência ao impacto Charpy, -30°C N kJ/m² ISO 179/1eU
Res. impacto Charpy c/entalhe, +23°C 40 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 20 kJ/m² ISO 179/1eA
Resistência à abrasão 78 mm³ ISO 4649
Dureza Shore D 67 - ISO 7619-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 119 °C ISO 75-1/-2
Temperatura de deflexão térmica , 0.45 MPa 156 °C ISO 75-1/-2
Temperatura de amolecimento Vicat, B 94 °C ISO 306
Outras propriedadesValorUnidadeMétodo de ensaio
Densidade 1300 kg/m³ ISO 1183
Características
Processamento
Moldagem por injeção
Características especiais
Alto impacto., Estabilidade a raios U.V./Intempéries
Características
Propriedades de barreira acústica, Resistência de fungos
Resistência Química
Estabilidade hidrolítica
Aplicaciones
Equipo deportivo
Disponibilidade regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.