Any use of this information falls under the rules of our
disclaimer.
Características de processamento/físicas | Valor | Unidade | Método de ensaio |
Other Standards[S] |
Contração após a moldagem, paralelo |
0.002 |
mm/mm |
|
Contração após a moldagem, perpendicular |
0.005 |
mm/mm |
|
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriedades mecânicas | Valor | Unidade | Método de ensaio |
Other Standards[S] |
Resistência à tração |
130 |
MPa |
|
Resistência à compressão |
150 |
MPa |
|
Módulo de flexão |
12000 |
MPa |
|
Resistência à flexão |
190 |
MPa |
|
Dureza Rockwell |
R 100 |
- |
|
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriedades térmicas | Valor | Unidade | Método de ensaio |
ASTM Dados |
UL94 flamabilidade |
V-0 |
- |
UL 94 |
Espessuras do tubo de teste |
2 |
mm |
- |
Other Standards[S] |
Coeficiente de expansão térmica, long. |
19.8 |
E-6/K |
|
DTUL @ 264 psi |
265 |
°C |
|
Temperatura de fusão |
285 |
°C |
|
S: | These properties are reported by the producer according standards that are different to our defaults. |
Propriedades elétricas | Valor | Unidade | Método de ensaio |
Other Standards[S] |
Resistência elétrica, tempo curto |
14.6 |
kV/mm |
|
Constante dielétrica, 1 MHz |
3.2 |
- |
|
Resistividade superficial específica |
1.2E14 |
Ohm |
|
Resistividade volumétrica específica |
>1E15 |
Ohm*cm |
|
S: | These properties are reported by the producer according standards that are different to our defaults. |
Outras propriedades | Valor | Unidade | Método de ensaio |
Other Standards[S] |
Densidade |
1800 |
kg/m³ |
|
S: | These properties are reported by the producer according standards that are different to our defaults. |
Características
Aditivos
Lubrificantes
Disponibilidade regional
Ásia Pacífico
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com