Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CELSTRAN® TPU-GF50-01 AD3002 Black - TPU-GLF50 - Celanese

Check here, which other Celstran datasheets, application examples or technical articles are available in Material Data Center

Propriedades mecânicas - Propriedades térmicas - Outras propriedades - Recomendação de processamento Moldagem por injeção - Diagrama

Any use of this information falls under the rules of our disclaimer.

Propriedades mecânicas	Valor	Unidade	Método de ensaio
ISO Dados
Módulo de tração	14300	MPa	ISO 527
Tensão na ruptura	195	MPa	ISO 527
Deformação na ruptura	1.7	%	ISO 527
Res. impacto Charpy c/entalhe, +23°C	47	kJ/m²	ISO 179/1eA

Propriedades térmicas	Valor	Unidade	Método de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa	96	°C	ISO 75-1/-2

Outras propriedades	Valor	Unidade	Método de ensaio
Densidade	1630	kg/m³	ISO 1183

Recomendação de processamento Moldagem por injeção	Valor	Unidade	Método de ensaio
Pré-secagem - temperatura	80	°C	-
Pré-secagem - tempo	4	h	-
Temperatura da massa	260 - 265	°C	-
Temperatura do molde	70 - 75	°C	-

Diagrama

Características

Processamento

Moldagem por injeção

Forma de entrega

Granulos, Negro

Características

Long fiber reinforced

Disponibilidade regional

América do Norte, Europa, Ásia Pacífico

Outras informações

Moldagem por injeção

Polyurethane material drying requirements: 4 hrs. @80° C.
A dehumidifier or desiccant dryer is recommended.
Celstran can be processed on a standard injection molding unit.
A general purpose metering screw is recommended with a zone
distribution of 40% feed, 40% transition, and 20% metering.
A free flowing check ring assembly is recommended.

Melt Temp: 260-265°C.
Mold Temp: 70- 75°C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.