Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CALIBRE™ 301-EP-37 - PC - Trinseo

Material Data Center offers the following functions for CALIBRE™ 301-EP-37:
unit conversion, PDF datasheet print

Check here, which other Calibre datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez, MFI 37 g/10min ISO 1133
Temperatura 300 °C -
Carga 1.2 kg -
ASTM Dados
Índice de fluidez, MFI 37 g/10min ASTM D 1238
Temperatura 300 °C -
Carga 1.2 kg -
Contração após a moldagem, paralelo 0.007 mm/mm ASTM D 955
Propriedades mecânicasValorUnidadeMétodo de ensaio
ASTM Dados
Módulo de tração 2413 MPa ASTM D 638
Resistência à tração no escoamento 58.6 MPa ASTM D 638
Alongamento no escoamento 5.5 % ASTM D 638
Deformação na ruptura 85 % ASTM D 638
Módulo de flexão 2372 MPa ASTM D 790
Resistência à flexão 90.3 MPa ASTM D 790
Dureza Rockwell R121 - ASTM D 785
Impacto Izod com entalhe, 1/8 in 534 J/m ASTM D 256
Impacto Izod com entalhe, baixa temperatura 443 J/m ASTM D 256
Temperatura -40 °C -
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Coef. de expansão térmica linear, paralelo 72 E-6/K ISO 11359-1/-2
Flamabilidade a 1.5mm esp. nom. V-2 class IEC 60695-11-10
Espessuras do tubo de teste 1.5 mm -
Flamabilidade a espessura h V-2 class IEC 60695-11-10
Espessuras do tubo de teste 3.0 mm -
ASTM Dados
UL94 flamabilidade V-2 - UL 94
Espessuras do tubo de teste 1.5 mm -
Coeficiente de expansão térmica, long. 72 E-6/K ASTM D 696
DTUL @ 264 psi 122 °C ASTM D 648
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de umidade 0.15 % Sim. to ISO 62
Densidade 1180 kg/m³ ISO 1183
Absorção de água, 24hr 0.15 % ASTM D 570
Densidade 1180 kg/m³ ASTM D 792
Características
Processamento
Moldagem por injeção
Aditivos
Desmoldante
Disponibilidade regional
América do Norte
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.