Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Utec® 5540 - (PE-UHMW) - Braskem

Material Data Center offers the following functions for Utec® 5540:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Utec datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
기계적 특성단위시험규격
ISO 데이터
항복강도 17 MPa ISO 527
파단시 강도 30 MPa ISO 527
파단시 신율 350 % ISO 527
챠피 충격 강도, +23°C 90 kJ/m² ISO 179/1eU
쇼어 D 경도 64 - ISO 7619-1
ASTM 데이터
항복강도 17 MPa ASTM D 638
파단시 강도 30 MPa ASTM D 638
파단시 신율 300 % ASTM D 638
쇼어 D 경도 64 - ASTM D 2240
아이조드 충격은 노치, 1/8 in N J/m ASTM D 256
열적 특성단위시험규격
ISO 데이터
비카트 연화 온도, A 128 °C ISO 306
ASTM 데이터
열팽창 계수, 평행 150 E-6/K ASTM D 696
DTUL @ 66 psi 79 °C ASTM D 648
DTUL @ 264 psi 48 °C ASTM D 648
녹는점 133 °C ASTM D 3418
비카트 연화 온도 128 °C ASTM D 1525
열전도율, 솔리드 0.0577 W/(m K) ASTM C 177
전기적 특성단위시험규격
ASTM 데이터
전기 압력, 단기간의 90 kV/mm ASTM D 149
표면 저항 1E12 Ohm ASTM D 257
부피 저항 1E14 Ohm*cm ASTM D 257
기타 특성단위시험규격
물에서의 흡수성, 24hr 0.01 % ASTM D 570
밀도 925 kg/m³ ASTM D 792
Intrinsic Viscosity 24 dl/g -
Bulk Density 450 kg/m³ -
특징
생산 공정
기타 압출, Compression Molding
특별 특성
고충격 또는 고충격 보강
특성
Tribologic Grade
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.