Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tefabloc™ TO 623 90A - TPS - Mitsubishi Chemical Performance Polymers

Material Data Center offers the following functions for Tefabloc™ TO 623 90A:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tefabloc datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 1 g/10min ISO 1133
온도 190 °C -
负荷 10 kg -
Other Standards[S]
성형 수축률, 평행 1.5 %
성형 수축률, 수직 0.8 %
S: These properties are reported by the producer according standards that are different to our defaults.
기계적 특성값단위시험규격
ISO 데이터
인장 강도 11.3 MPa ISO 37
파단시 신율 428 % ISO 37
쇼어 A 경도 91 - ISO 7619-1
Other Standards[S]
100% 변형시 강도 8.5 MPa ISO 37
S: These properties are reported by the producer according standards that are different to our defaults.
기타 특성값단위시험규격
밀도 1170 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 60 °C -
Pre-drying - Time 4 h -
용융수지온도 270 °C -
성형온도 20 - 60 °C -
Zone 1 200 - 235 °C -
Nozzle temperature 230 °C -
Screw speed 50 - 80 rpm -
Injection speed 40 - 100 mm/s -
Injection pressure 10 - 25 MPa -
유지압력 10 - 15 MPa -
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
U.V. 안정성 또는 기후 안정성, Opaque
내화학성에
Alkali Resistance
응용
자동차의, 전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.