Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TARFLON® LEV2200KL - PC - Idemitsu Chemicals

Material Data Center offers the following functions for TARFLON® LEV2200KL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tarflon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 광학 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 12 cm³/10min ISO 1133
온도 300 °C -
하중 1.2 kg -
Other Standards[S]
성형 수축률, 평행 0.6 % Producer Method
성형 수축률, 수직 0.6 % Producer Method
S: These properties are reported by the producer according standards that are different to our defaults.
기계적 특성값단위시험규격
ISO 데이터
항복강도 65 MPa ISO 527
파단시 평균신율 95 % ISO 527
굴곡 계수, 23°C 2300 MPa ISO 178
굴곡 강도 90 MPa ISO 178
챠피 노치드 충격 강도, +23°C 80 kJ/m² ISO 179/1eA
로크웰 경도 R 120 - ISO 2039-2
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 125 °C ISO 75-1/-2
선형 열팽창 계수, 평행 65 E-6/K ISO 11359-1/-2
두께 H인 제품의 난연성 V-2 class IEC 60695-11-10
테스트 두께 0.4 mm -
전기적 특성값단위시험규격
Other Standards[S]
CTI 325 - UL 746A
S: These properties are reported by the producer according standards that are different to our defaults.
광학 특성값단위시험규격
ISO Data
광선 투겠淅 90[1] % ISO 13468-1, -2
ASTM 데이터
굴절 지수 1.58 - ASTM D 542
1: 3mm
기타 특성값단위시험규격
밀도 1200 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 120 °C -
Pre-drying - Time 5 - 8 h -
용융수지온도 260 - 300 °C -
성형온도 80 - 120 °C -
특징
생산 공정
사출 성형
특별 특성
U.V. 안정성 또는 기후 안정성, 열안정성, 투명도
내화학성에
Hydrolytically Stable
응용
전기 및 전자
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.