Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Styroflex® 2G66 LE - SB - INEOS Styrolution

Material Data Center offers the following functions for Styroflex® 2G66 LE:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styroflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 13 cm³/10min ISO 1133
온도 200 °C -
하중 5 kg -
기계적 특성단위시험규격
ISO 데이터
인장탄성률 120 MPa ISO 527
항복강도 4 MPa ISO 527
항복변형률 5 % ISO 527
굴곡 계수, 23°C 140 MPa ISO 178
굴곡 강도 4 MPa ISO 178
챠피 노치드 충격 강도, -30°C 2 kJ/m² ISO 179/1eA
쇼어 A 경도 84 - ISO 7619-1
쇼어 D 경도 34 - ISO 7619-1
열적 특성단위시험규격
ASTM 데이터
비카트 연화 온도 35 °C ASTM D 1525
전기적 특성단위시험규격
ISO 데이터
부피 저항 1E13 Ohm*m IEC 62631-3-1
표면 저항 1E15 Ohm IEC 62631-3-2
광학 특성단위시험규격
ASTM 데이터
탁도 5 % ASTM D 1003
광선 투겠淅 80 % ASTM D 1003
기타 특성단위시험규격
물에서의 흡수성 0.07 % ISO 62와 유사
밀도 998 kg/m³ ISO 1183
특징
생산 공정
사출 성형, 기타 압출
특별 특성
투명도
특성
Copolymer
Certifications
Food contact
응용
의료, 포장
지역별 검색
짱쨌쨈, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.