Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Stat-Tech™ NN-20CF/000 SO1 - PA66-CF20 - Avient Corporation

Material Data Center offers the following functions for Stat-Tech™ NN-20CF/000 SO1:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Stat-Tech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ASTM 데이터
성형 수축률, 평행 0.00125 mm/mm ASTM D 955
성형 수축률, 수직 0.017 mm/mm ASTM D 955
기계적 특성단위시험규격
ISO 데이터
인장탄성률 11000 MPa ISO 527
파단시 강도 155 MPa ISO 527
파단시 신율 4 % ISO 527
굴곡 계수, 23°C 10300 MPa ISO 178
챠피 충격 강도, +23°C 70 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 20 kJ/m² ISO 179/1eA
ASTM 데이터
굴곡 강도 231 MPa ASTM D 790
열적 특성단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 250 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 261 °C ISO 75-1/-2
전기적 특성단위시험규격
ASTM 데이터
표면 저항 10000 Ohm ASTM D 257
부피 저항 10000 Ohm*cm ASTM D 257
기타 특성단위시험규격
밀도 1160 kg/m³ ISO 1183
Processing Recommendation Injection Molding단위시험규격
용융수지온도 288 - 304 °C -
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
증가된 전기전도성, 고충격 또는 고충격 보강, 열안정성
내화학성에
General Chemical Resistance
응용
항공 우주, 자동차의, IT / 비즈니스 기계, 전기 및 전자 , 캡슐화된, 스포츠 장비
지역별 검색
짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.