Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Pebax® Rnew® 35R53 SP 01 - TPA - ARKEMA

Check here, which other Pebax datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Polyether block Pebax® Rnew® 35R53 SP 01 resin is a thermoplastic elastomer made of flexible polyether and rigid polyamide based on renewable resources. This SP grade has been developed to be heat and UV resistant.

The percentage of renewable carbon is 29% (calculated value, based on ASTM D6866).



Main applications:

• Flexible injected parts

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.

Processing/Physical Characteristics	건조/응축	단위	시험규격
ISO 데이터
성형 수축률, 평행	0.6 / *	%	ISO 294-4, 2577
성형 수축률, 수직	0.6 / *	%	ISO 294-4, 2577

기계적 특성	건조/응축	단위	시험규격
ISO 데이터
인장탄성률	- / 40	MPa	ISO 527
50%변형하에서의 강도	- / 5	MPa	ISO 527
파단시 신율	- / >50	%	ISO 527
파단시 강도 TPE	30 / *	MPa	ISO 527
파단시 신율 TPE	>300 / *	%	ISO 527
쇼어 D 경도	25 / *	-	ISO 7619-1

열적 특성	건조/응축	단위	시험규격
ISO 데이터
녹는점, 10°C/min	135 / *	°C	ISO 11357-1/-3

기타 특성	건조/응축	단위	시험규격
물에서의 흡수성	1.3 / *	%	ISO 62와 유사
조건에서의 흡습성	0.5 / *	%	ISO 62와 유사
밀도	1020 / 1020	kg/m³	ISO 1183
Biobased content	29	%	-

도표

특징

생산 공정

사출 성형, 필름 압출, 외형 압출, 기타 압출, 트랜스퍼 성형, 주조, 열성형

인도 유형

펠렛 (입자,알갱이)

특별 특성

가시광선 안정성, U.V. 안정성 또는 기후 안정성, 열안정성

Certifications

Contains renewable resources

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

기타 정보

사E성

Processing conditions (injection molding):

- Typical melt temperature (Min / Recommended / Max) : 180°C / 210°C / 260°C.
- Typical mold temperature : 10 – 30°C.
- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 55-65°C.

기타 압출

Processing conditions (extrusion):

- Typical melt temperature (Min / Recommended / Max): 190°C / 205°C / 220°C.
- Drying time and temperature (only necessary for bags opened for more than two hours): 4-8 hours at 55-65°C.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.