Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Halene - P M307 - PP - Haldia Petrochemicals

Material Data Center offers the following functions for Halene - P M307:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Halene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서
M307 is a Heterophasic Polypropylene Impact Copolymer produced by the Spheripol Technology.

M307 combines excellent processability with low Cycle Time.

M307 is recommended for General Purpose Injection Molding.
Processing/Physical Characteristics단위시험규격
ASTM 데이터
용융 흐름성, MFI 7 g/10min ASTM D 1238
온도 230 °C -
하중 2.16 kg -
기계적 특성단위시험규격
ASTM 데이터
항복강도 23 MPa ASTM D 638
항복변형률 6 % ASTM D 638
굴곡 계수 950 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 80 J/m ASTM D 256
열적 특성단위시험규격
ASTM 데이터
DTUL @ 66 psi 88 °C ASTM D 648
비카트 연화 온도 145 °C ASTM D 1525
기타 특성단위시험규격
밀도 900 kg/m³ ASTM D 792
Processing Recommendation Injection Molding단위시험규격
성형온도 30 - 40 °C -
Zone 1 180 - 260 °C -
특징
생산 공정
사출 성형
특성
Copolymer, Impact Copolymer
응용
범용
지역별 검색
쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.