Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Grivory HT1V-6 FWA black 9225 - PA6T/6I-GF60 - EMS-GRIVORY | a unit of EMS-CHEMIE AG

Material Data Center offers the following functions for Grivory HT1V-6 FWA black 9225:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Grivory datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Product nomenclature: ISO 16396-PA6T/6I,GF60,M1H,C12-220 

 

Co Polyamide

Partially aromatic Polyamide

Product Attributes

  Hydrolysis resistant, Improved heat resistance, Improved UV resistance (outdoor use)

Markets

  Industry & Consumer goods
  Housewares, Medical devices, Sanitary, water and gas supply

Approvals

  Food Contact
  NSF 51, EU Requirements, FDA
  Potable Water Contact
  NSF 61, KTW, WRAS, ACS, DVGW W270
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
성형 수축률, 평행 0.1 / * % ISO 294-4, 2577
성형 수축률, 수직 0.2 / * % ISO 294-4, 2577
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 23000 / 22500 MPa ISO 527
파단시 강도 260 / 250 MPa ISO 527
파단시 신율 1.5 / 1.5 % ISO 527
챠피 충격 강도 , +23°C 75 / 75 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 75 / 75 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 11 / 11 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 10 / 10 kJ/m² ISO 179/1eA
최대 관통힘, +23°C 1200 / 1200 N ISO 6603-2
관통 에너지, +23°C 3.5 / 3.5 J ISO 6603-2
쇼어 D 경도 92 / * - ISO 7619-1
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 325 / * °C ISO 11357-1/-3
하중하에서의 변형온도, 8.00 MPa 215 / * °C ISO 75-1/-2
선형 열팽창 계수, 평행 15 / * E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 40 / * E-6/K ISO 11359-1/-2
두께 H인 제품의 난연성 HB / * class IEC 60695-11-10
테스트 두께 0.8 / * mm -
전기적 특성건조/응축단위시험규격
ISO 데이터
부피 저항 1E11 / 1E11 Ohm*m IEC 62631-3-1
표면 저항 * / 1E12 Ohm IEC 62631-3-2
전기 압력 30 / 30 kV/mm IEC 60243-1
CTI - / 600 - IEC 60112
기타 특성건조/응축단위시험규격
물에서의 흡수성 3 / * % ISO 62와 유사
조건에서의 흡습성 1.2 / * % ISO 62와 유사
밀도 1780 / - kg/m³ ISO 1183
특징
생산 공정
사출 성형
인도 유형
과립, 검정
특별 특성
U.V. 안정성 또는 기후 안정성, 열안정성
Certifications
Food contact, Food approval FDA 21 CFR, Drinking water contact, Drinking water contact KTW, Drinking water contact DVGW W270, Drinking water contact NSF 61
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.