Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Diran™ 410MF07 - PA*-MX7 - Stratasys Ltd.

Material Data Center offers the following functions for Diran™ 410MF07:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Diran datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
열적 특성 - 전기적 특성 - 기타 특성 - 3D Data
Any use of this information falls under the rules of our disclaimer.
열적 특성값단위시험규격
ASTM 데이터
DTUL @ 66 psi 90 °C ASTM D 648
DTUL @ 264 psi 70 °C ASTM D 648
Other Standards[S]
유리 전이 온도 117 °C ASTM D 7426
S: These properties are reported by the producer according standards that are different to our defaults.
전기적 특성값단위시험규격
ASTM 데이터
부피 저항 1.5E15 Ohm*cm ASTM D 257
기타 특성값단위시험규격
밀도 1160 kg/m³ ASTM D 792
3D Data값단위시험규격
인장탄성률, on-edge 1690[1] MPa -
인장탄성률, upright 1460[2] MPa -
파단시 강도, on-edge 40[1] MPa -
파단시 강도, upright 30[2] MPa -
파단시 신율 , on-edge 12[1] % -
파단시 신율 , upright 3.1[2] % -
굴곡 계수, on-edge 1850[3] MPa -
굴곡 계수, upright 1470[4] MPa -
1: XZ-direction; reference to ASTM D638   2: ZX-direction; reference to ASTM D638   3: XZ-direction; reference to ASTM D790  4: ZX-direction; reference to ASTM D790
특징
생산 공정
Additive Manufacturing
인도 유형
Monofilament
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.