Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CYROLITE® G 20 HIFLO - MBS - Röhm GmbH

Material Data Center offers the following functions for CYROLITE® G 20 HIFLO:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Cyrolite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 테스트 견본 생산
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Productprofil:

CYROLITE G-20 HIFLO compound is an impact-modified acrylic-based multipolymer for molding and extrusion of medical applications.

Typical properties of CYROLITE® acrylic-based multipolymer compounds are:


• excellent chemical resistance to fats and oils
• excellent bonding and welding capabilities
• excellent bonding to PVC tubing
• good impact strength
• good light transmission
• good resistance to EtO, gamma and E-beam sterilization

The special properties of CYROLITE G-20 HIFLO compound are:


• excellent melt flow rate
• good heat resistance

Application:

Used for injection molding and extrusion of medical devices, medical packaging, as well as toys and appliance parts.

Example:

Y-sites, luer connectors and check valves.

Processing:

CYROLITE G-20 HIFLO compound can be processed in injection molding machines and extrusion lines with 3- zone general purpose screws.

Physical Form / Packaging:

Available in 1500 lb. gaylord boxes; other packaging available on request.

Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 6.2 cm³/10min ISO 1133
온도 230 °C -
하중 3.8 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2300 MPa ISO 527
항복강도 51 MPa ISO 527
항복변형률 3.4 % ISO 527
파단시 평균신율 11 % ISO 527
챠피 충격 강도 , +23°C N kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 11 kJ/m² ISO 179/1eA
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 79 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 83 °C ISO 75-1/-2
비카트 연화 온도, B 95 °C ISO 306
선형 열팽창 계수, 평행 90 E-6/K ISO 11359-1/-2
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.6 mm -
산소지수로서의 난연성 18 % ISO 4589-1/-2
전기적 특성값단위시험규격
ISO 데이터
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 1E13 Ohm IEC 62631-3-2
기타 특성값단위시험규격
조건에서의 흡습성 0.3 % ISO 62와 유사
밀도 1110 kg/m³ ISO 1183
테스트 견본 생산값단위시험규격
ISO 데이터
사출성형: 용융수지온도 240 °C ISO 294
사출성형: 금형온도 65 °C ISO 294
사출성형: 사출속도 195 mm/s ISO 294
특징
생산 공정
사출 성형, 필름 압출, 외형 압출, 기타 압출, 열성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
고충격 또는 고충격 보강, 열안정성, 투명도, 멸균, 에틸렌 산화물 멸균(EtO), Gamma irradiation sterilization, Electron beam (e-beam) sterilization
특성
Good Adhesion, Weldable
내화학성에
Grease Resistance, Oil Resistance
응용
의료, 포장
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
기타 정보
사E성
PREPROCESSING
Predrying temperature: 80 °C
Predrying time: 3 - 4 h
PROCESSING
Melt temperature: 195 - 240°C
Mold temperature:50 - 80°C
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.