Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of CELSTRAN® PP-GF30-0501 P10 - PP-GLF30 - Celanese
Material Data Center offers the following functions for CELSTRAN® PP-GF30-0501 P10:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces
Check here, which other Celstran datasheets, application examples or technical articles are available in Material Data Center
Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our
disclaimer.
제품 설명서
Material code according to ISO 1043-1: PP Heat stabilized polypropylene reinforced with 30 weight percent long glass fibers. Natural. The fibers are chemically coupled to the polypropylene matrix. The impact properties are enhanced. The pellets are cylindrical and normally as well as the embedded fibers 11 mm long. Parts molded of CELSTRAN have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Application field: Functional/structural parts for automotive
| Flammability at thickness h (1 mm) | HB | - |
| 기계적 특성 | 값 | 단위 | 시험규격 |
| ISO 데이터 |
| 인장탄성률 |
6300 |
MPa |
ISO 527 |
| 파단시 강도 |
110 |
MPa |
ISO 527 |
| 파단시 신율 |
2.3 |
% |
ISO 527 |
| 챠피 충격 강도 , +23°C |
70 |
kJ/m² |
ISO 179/1eU |
| 챠피 충격 강도, -30°C |
80 |
kJ/m² |
ISO 179/1eU |
| 챠피 노치드 충격 강도, +23°C |
30 |
kJ/m² |
ISO 179/1eA |
| 챠피 노치드 충격 강도, -30°C |
29 |
kJ/m² |
ISO 179/1eA |
| 열적 특성 | 값 | 단위 | 시험규격 |
| ISO 데이터 |
| 하중하에서의 변형온도, 1.80 MPa |
158 |
°C |
ISO 75-1/-2 |
| 하중하에서의 변형온도, 8.00 MPa |
120 |
°C |
ISO 75-1/-2 |
| 두께 H인 제품의 난연성 |
HB |
class |
IEC 60695-11-10 |
| 테스트 두께 |
1.0 |
mm |
- |
| 기타 특성 | 값 | 단위 | 시험규격 |
| 밀도 |
1120 |
kg/m³ |
ISO 1183 |
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이), 자연 색상
특별 특성
고충격 또는 고충격 보강, 열안정성
특성
Chemically Coupled Reinforcement, Creep Resistance, Long fiber reinforced, Low Warpage
응용
자동차의
지역별 검색
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
