Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CarbonX™ Carbon Fiber Ultem™ PEI - PEI-CF20 - 3DXTECH

Material Data Center offers the following functions for CarbonX™ Carbon Fiber Ultem™ PEI:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other CarbonX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
열적 특성 - 전기적 특성 - 기타 특성 - 3D Data
Any use of this information falls under the rules of our disclaimer.
제품 설명서
​Printed Spesimen Conditions
Printer: Open Source FDM/FFF
Nozzle: 0,4 mm
Layer Height: 0,25 mm
Infill: 100%, +/- 45°
Extrusion Temp: 385°C
Bed Temp: 140°C
Specimen Orientation: XY Flat
열적 특성값단위시험규격
ISO 데이터
유리 전이 온도, 10 °C/min 217 °C ISO 11357-1/-2
하중하에서의 변형온도, 0.45 MPa 205 °C ISO 75-1/-2
전기적 특성값단위시험규격
ISO 데이터
표면 저항 1E9 Ohm IEC 62631-3-2
기타 특성값단위시험규격
밀도 1310 kg/m³ ISO 1183
3D Data값단위시험규격
인장탄성률, flat 7700[1] MPa -
파단시 강도, flat 145[1] MPa -
파단시 신율 , flat 1.5[1] % -
굴곡 계수, flat 7500[1] MPa -
굴곡 강도, flat 120[1] MPa -
1: 45°-45°
특징
생산 공정
Additive Manufacturing
인도 유형
Monofilament, 검정
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.