Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of WONDERLITE PC-122U - PC - Chi Mei Corporation

Material Data Center offers the following functions for WONDERLITE PC-122U:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Wonderlite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 22 cm³/10min ISO 1133
温度 300 °C -
荷重 1.2 kg -
成形収縮率, 平行 0.6 % ISO 294-4, 2577
ASTM数据
メルトフローレイト, MFI 22 g/10min ASTM D 1238
温度 300 °C -
荷重 1.2 kg -
機械的特性値単位テスト基準
ISO データ
降伏応力 63 MPa ISO 527
破壊応力 70 MPa ISO 527
曲げ弾性率, 23°C 2400 MPa ISO 178
曲げ強さ 90 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 60 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 60 kJ/m² ISO 180/1A
ASTM数据
降伏応力 61.6 MPa ASTM D 638
曲げ弾性率 2344 MPa ASTM D 790
曲げ強さ 89.8 MPa ASTM D 790
ロックウェル硬度 M 77 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 779 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 127 °C ISO 75-1/-2
ビカット軟化温度, A 148 °C ISO 306
ビカット軟化温度, B 143 °C ISO 306
線膨張係数, 平行 70 E-6/K ISO 11359-1/-2
厚さhでの燃焼性 V-2 class IEC 60695-11-10
試験片の厚さ 3.0 mm -
Yellow Card 可用 はい - -
ASTM数据
UL94 燃焼性 V-2 - UL 94
追加試験片の厚さ 0.991 mm -
DTUL @ 66 psi 143 °C ASTM D 648
ビカット軟化温度 148 °C ASTM D 1525
電気的特性.値単位テスト基準
ASTM数据
耐アーク 90 s ASTM D 495
その他の特性.値単位テスト基準
密度. 1200 kg/m³ ISO 1183
密度 1200 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 120 °C -
Pre-drying - Time 4 h -
金型温度 70 - 120 °C -
Feed temperature 220 - 300 °C -
Zone 1 240 - 310 °C -
Nozzle temperature 240 - 300 °C -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
紫外線安定化.
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.