Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrasint PA6 LM black - PA6 - BASF

Material Data Center offers the following functions for Ultrasint PA6 LM black:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrasint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 熱的特性 - その他の特性. - 3D Data
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 3 / * cm³/10min ISO 1133
温度 240 / * °C -
荷重 2.16 / * kg -
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 193 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 98 / * °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 183 / * °C ISO 75-1/-2
ビカット軟化温度, A 194 / * °C ISO 306
ビカット軟化温度, B 185 / * °C ISO 306
その他の特性.乾燥/調湿単位テスト基準
密度. 1370 / - kg/m³ ISO 1183
Bulk density 590 kg/m³ -
3D Data乾燥/調湿単位テスト基準
Other Standards[S]
引張弾性率, flat 4950 / 1500 MPa ISO 527
引張弾性率, upright 4250 / 1350 MPa ISO 527
引張強度, flat 73 / 44 MPa ISO 527
引張強度, upright 49 / 32 MPa ISO 527
破壊ひずみ, flat 2.8 / 17 % ISO 527
破壊ひずみ, upright 1.3 / 5.5 % ISO 527
曲げ弾性率, flat 4500 / 1450 MPa ISO 178
曲げ弾性率, upright 3650 / 1200 MPa ISO 178
シャルピー衝撃強さ, +23°C, flat 18 / 52 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, +23°C, upright 5.7 / 9.7 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C, flat 3 / 5.6 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, +23°C, upright 2.8 / 4.2 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C, flat 15 / 28 kJ/m² ISO 180/1U
アイゾット衝撃試験, +23°C, upright 6 / 6 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C, flat 3.8 / 6.6 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ, +23°C, upright 3.3 / 5.3 kJ/m² ISO 180/1A
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
Additive Manufacturing, Laser Sintering
納入形状.
パウダー., 黒
な特性
Thermal Stability
アプリケーション
自動車
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.