Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4440 R01 - PBT - BASF

Material Data Center offers the following functions for Ultradur® B 4440 R01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - 材料特有の特性
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 10 cm³/10min ISO 1133
温度 250 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2000 MPa ISO 527
降伏応力 28 MPa ISO 527
降伏ひずみ 4.5 % ISO 527
破壊ひずみ 20 % ISO 527
シャルピー衝撃強さ, +23°C 40 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 35 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 3.5 kJ/m² ISO 179/1eA
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 223 °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 55 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 135 °C ISO 75-1/-2
厚さhでの燃焼性 V-2 class IEC 60695-11-10
試験片の厚さ 0.4 mm -
酸素指数 42.9 % ISO 4589-1/-2
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 1 mm -
電気的特性.値単位テスト基準
ISO データ
比誘電率, 1MHz 3 - IEC 62631-2-1
誘電正接, 1MHz 160 E-4 IEC 62631-2-1
体積抵抗率 1E13 Ohm*m IEC 62631-3-1
表面抵抗率 1E16 Ohm IEC 62631-3-2
耐トラッキング性 600 - IEC 60112
その他の特性.値単位テスト基準
吸水率. 0.4 % Sim. to ISO 62
吸湿率 0.25 % Sim. to ISO 62
密度. 1310 kg/m³ ISO 1183
Bulk density 750 kg/m³ -
材料特有の特性値単位テスト基準
ISO データ
粘度数. 125 cm³/g ISO 307, 1157, 1628
特殊な特性
成形加工法.
Pipe/Tube Extrusion, その他の押出成形.
特殊な特性.
難燃., Halogen-free, 高耐衝撃及び耐衝撃改良.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ., 近東/アフリカ
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.