Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Filament AMHU1010F - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Filament AMHU1010F:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
3D Data
Any use of this information falls under the rules of our disclaimer.
商品の説明文
ULTEM™ AMHU1010F filament is a polyetherimide product for 3D printing applications manufactured from ULTEM™ HU1010 resin. The filament is biocompatible (ISO 10993 or USP Class VI) and printed parts can be gamma, EtO or steam sterilized. This filament can be used for food and drug packaging and medical device manufacturing, from conceptual modeling to functional prototyping and end-use parts. Filament spools can be linked to resin raw material batch to help ensure material compliance and traceability.
3D Data値単位テスト基準
Other Standards[S]
引張弾性率, flat 2750 MPa ASTM D 638
引張弾性率, on-edge 2870 MPa ASTM D 638
引張弾性率, upright 2840 MPa ASTM D 638
破壊応力, flat 73 MPa ASTM D 638
破壊応力, on-edge 80 MPa ASTM D 638
破壊応力, upright 34 MPa ASTM D 638
破壊ひずみ, flat 4 % ASTM D 638
破壊ひずみ, on-edge 3.8 % ASTM D 638
破壊ひずみ, upright 1.3 % ASTM D 638
曲げ弾性率, flat 2520 MPa ASTM D 790
曲げ弾性率, on-edge 2840 MPa ASTM D 790
曲げ弾性率, upright 2380 MPa ASTM D 790
荷重たわみ温度, 1.80 MPa, flat 211 °C ASTM D 6484
荷重たわみ温度, 1.80 MPa, on-edge 210 °C ASTM D 6484
荷重たわみ温度, 1.80 MPa, upright 208 °C ASTM D 6484
ビカット軟化温度, B, flat 220 °C ASTM D 1525
ビカット軟化温度, B, on-edge 220 °C ASTM D 1525
ビカット軟化温度, B, upright 220 °C ASTM D 1525
線膨張係数, 平行, flat 51 E-6/K ASTM E 831
線膨張係数, 平行, on-edge 53 E-6/K ASTM E 831
線膨張係数, 平行, upright 53 E-6/K ASTM E 831
線膨張係数, 直角, flat 53 E-6/K ASTM E 831
線膨張係数, 直角, on-edge 52 E-6/K ASTM E 831
線膨張係数, 直角, upright 53 E-6/K ASTM E 831
厚さhでの燃焼性, flat V-0 class UL 94
厚さhでの燃焼性, on-edge V-0 class UL 94
厚さhでの燃焼性, upright V-0 class UL 94
試験片の厚さ 1.5 mm UL 94
体積抵抗率, flat 6.24E12 Ohm*m ASTM D 257
体積抵抗率, on-edge 1.26E13 Ohm*m ASTM D 257
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament
特殊な特性.
エチレンオキシド滅菌(EtO), 蒸気滅菌, Gamma irradiation sterilization
Certifications
Food contact, Medical Grade, US Pharmacopeia Class VI Approved
アプリケーション
医療の, パッケージング
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.