Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Filament AM9085F - (PEI+PC) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Filament AM9085F:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
3D Data
Any use of this information falls under the rules of our disclaimer.
商品の説明文
ULTEM™ AM9085F filament is a high performance polyetherimide blend product manufactured from ULTEM™ 9085 resin.  It is available in black and natural (unpigmented) colors.  It provides high heat resistance and mechanical strength, is UL94 V-0 compliant at 1.5 and 3.0 mm (Blue Cards are available on UL IQ Database), and meets FAR 25.853 and OSU 55/55 with low toxicity, smoke, and flame evolution.
3D Data値単位テスト基準
Other Standards[S]
引張弾性率, flat 2180 MPa ASTM D 638
引張弾性率, on-edge 2560 MPa ASTM D 638
引張弾性率, upright 2440 MPa ASTM D 638
破壊応力, flat 62 MPa ASTM D 638
破壊応力, on-edge 80 MPa ASTM D 638
破壊応力, upright 45 MPa ASTM D 638
破壊ひずみ, flat 5.1 % ASTM D 638
破壊ひずみ, on-edge 5.8 % ASTM D 638
破壊ひずみ, upright 2.3 % ASTM D 638
曲げ弾性率, flat 2130 MPa ASTM D 790
曲げ弾性率, on-edge 2550 MPa ASTM D 790
曲げ弾性率, upright 2070 MPa ASTM D 790
荷重たわみ温度, 1.80 MPa, flat 175 °C ASTM D 6484
荷重たわみ温度, 1.80 MPa, on-edge 175 °C ASTM D 6484
荷重たわみ温度, 1.80 MPa, upright 165 °C ASTM D 6484
線膨張係数, 平行, flat 57.1 E-6/K ASTM E 831
線膨張係数, 平行, on-edge 60.6 E-6/K ASTM E 831
線膨張係数, 平行, upright 62.1 E-6/K ASTM E 831
線膨張係数, 直角, flat 58.3 E-6/K ASTM E 831
線膨張係数, 直角, on-edge 61.1 E-6/K ASTM E 831
線膨張係数, 直角, upright 62.9 E-6/K ASTM E 831
厚さhでの燃焼性, flat V-0 class UL 94
厚さhでの燃焼性, on-edge V-0 class UL 94
厚さhでの燃焼性, upright V-0 class UL 94
試験片の厚さ 1.5 mm UL 94
体積抵抗率, flat 1.07E13 Ohm*m ASTM D 257
体積抵抗率, on-edge 1.1E13 Ohm*m ASTM D 257
S: These properties are reported by the producer according standards that are different to our defaults.
特殊な特性
成形加工法.
Additive Manufacturing
納入形状.
Monofilament, 黒, ナチュラルカラー
特殊な特性.
熱安定化.
な特性
Low Smoke
領域別の利用可能性
北アメリカ., ヨーロッパ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.