Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 2300R - PEI-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 2300R:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
ULTEM 2300R resin is a standard flow 30% glass fiber reinforced polyetherimide resin with an added internal mold release. The material is RoHS compliant and is intrinsically flame retardant without the use of FR modifiers and offers UL94 V0 and 5VA ratings. The material may offer excellent dimension stability, strength, stiffness and creep resistance up to high temperature due to its high glass transition temperature of 217°C. The material is opaque and can be custom colored.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 6 cm³/10min ISO 1133
温度 360 °C -
荷重 5 kg -
ASTM数据
メルトフローレイト, MFI 5 g/10min ASTM D 1238
温度 337 °C -
荷重 6.6 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 10500 MPa ISO 527
破壊応力 175 MPa ISO 527
破壊ひずみ 2.4 % ISO 527
曲げ弾性率, 23°C 9600 MPa ISO 178
シャルピー衝撃強さ, +23°C 40 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30ﾟC 40 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 10 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 10 kJ/m² ISO 179/1eA
アイゾット衝撃試験, +23°C 40 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 10 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 10 kJ/m² ISO 180/1A
温度 -30 °C -
ロックウェル硬度 M 110 - ISO 2039-2
Ball indentation hardness 165 MPa ISO 2039-1
ASTM数据
引張弾性率 10400 MPa ASTM D 638
破壊応力 175 MPa ASTM D 638
破断伸び 2.5 % ASTM D 638
曲げ弾性率 9700 MPa ASTM D 790
ロックウェル硬度 M 114 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 90 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 80 J/m ASTM D 256
温度 -30 °C -
アイゾット衝撃試験, 1/8 in 600 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 210 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 215 °C ISO 75-1/-2
ビカット軟化温度, A 225 °C ISO 306
ビカット軟化温度, B 213 °C ISO 306
線膨張係数, 平行 18 E-6/K ISO 11359-1/-2
線膨張係数, 直角 48 E-6/K ISO 11359-1/-2
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 0.2 mm -
Yellow Card 可用 はい - -
厚さhでの燃焼性 5V 5VA class IEC 60695-11-20
試験片の厚さ 1.2 mm -
Yellow Card 可用 はい - -
酸素指数 48 % ISO 4589-1/-2
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 2 mm -
グローワイヤ着火温度 (GWIT) 900 °C IEC 60695-2-13
GWIT - 試験片の厚さ 2 mm -
ASTM数据
線膨張係数, 平行 19 E-6/K ASTM D 696
線膨張係数, 直角 41 E-6/K ASTM D 696
DTUL @ 66 psi 215 °C ASTM D 648
DTUL @ 264 psi 211 °C ASTM D 648
酸素指数 50 % ASTM D 2863
電気的特性.値単位テスト基準
ISO データ
比誘電率, 1MHz 3.4 - IEC 62631-2-1
誘電正接, 1MHz 25 E-4 IEC 62631-2-1
体積抵抗率 1E13 Ohm*m IEC 62631-3-1
表面抵抗率 >1E15 Ohm IEC 62631-3-2
耐電圧 35 kV/mm IEC 60243-1
耐トラッキング性 150 - IEC 60112
ASTM数据
耐電圧, 短い時間 24.8 kV/mm ASTM D 149
体積抵抗率 3E16 Ohm*cm ASTM D 257
耐アーク 90 s ASTM D 495
その他の特性.値単位テスト基準
吸水率. 0.9 % Sim. to ISO 62
吸湿率 0.6 % Sim. to ISO 62
密度. 1510 kg/m³ ISO 1183
吸水率, 24hr 0.16 % ASTM D 570
吸水率, 平衡 0.9 % ASTM D 570
密度 1510 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 150 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
樹脂温度 350 - 410 °C -
金型温度 135 - 180 °C -
Feed temperature 80 - 120 °C -
Zone 1 330 - 400 °C -
Zone 2 340 - 410 °C -
Zone 3 345 - 420 °C -
Nozzle temperature 345 - 410 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.5 MPa -
特殊な特性
成形加工法.
射出成形., 異形押出成形., シート押出成形., その他の押出成形., Compression Molding, Additive Manufacturing
添加剤.
離型剤.
特殊な特性.
難燃., Halogen-free, 熱安定化., Opaque
な特性
Creep Resistance, Good Adhesion, Low Smoke
耐薬品性
General Chemical Resistance, Hydrolytically Stable
Certifications
RoHS
アプリケーション
航空宇宙, 自動車, 建築構造, 電気電子, 汎用, パッケージング, スポーツ用品
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.