Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 1040P - Americas - PEI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 1040P - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Enhanced Flow Polyetherimide in 350 micron powder.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 10 cm³/10min ISO 1133
温度 220 °C -
荷重 5 kg -
ASTM数据
メルトフローレイト, MFI 6.6 g/10min ASTM D 1238
温度 295 °C -
荷重 6.6 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 3000 MPa ISO 527
降伏応力 90 MPa ISO 527
降伏ひずみ 5 % ISO 527
破壊応力 90 MPa ISO 527
破壊ひずみ 10 % ISO 527
曲げ弾性率 3000 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 5 kJ/m² ISO 179/1eA
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm N kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm N kJ/m² ISO 180/1A
ASTM数据
引張弾性率 3440 MPa ASTM D 638
降伏応力 97 MPa ASTM D 638
破壊応力 97 MPa ASTM D 638
降伏点伸び 5 % ASTM D 638
破断伸び 10 % ASTM D 638
曲げ弾性率 3400 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 21 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 20 J/m ASTM D 256
温度 -30 °C -
アイゾット衝撃試験, 1/8 in 470 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 190 °C ISO 75-1/-2
ビカット軟化温度, B 211 °C ISO 306
ビカット軟化温度, 120°C/h 50N 212 °C ISO 306
ASTM数据
ビカット軟化温度 205 °C ASTM D 1525
その他の特性.値単位テスト基準
吸水率. 1.25 % Sim. to ISO 62
吸湿率 0.7 % Sim. to ISO 62
密度. 1270 kg/m³ ISO 1183
密度 1270 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形.
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.