Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Treva™ GC6011NAT-75 - CAP - Eastman Chemical Co.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Treva datasheets, application examples or technical articles are available in Material Data Center
Eastman TREVA™ Renew engineering bioplastic GC6011-75 Natural is a new cellulose-based engineering bioplastic that offers both high performance and reduced environmental impact. Renew polymers enable a brand to reduce
consumption of fossil feedstock-based plastics, achieve sustainability targets without compromise, and be a fast mover in a growing market for sustainable consumer products.
TREVA is chemically resistant, dimensionally stable, flows well, is BPA-free, and has low birefringence.
Eastman Renew polymers have been certified by International Sustainability & Carbon Certification (ISCC), a global, independent agency for tracking sustainable content in a variety of industries. Renew polymers are produced with ISCC certified circular content by mass balance allocation.
Processing/Physical Characteristics | 値 | 単位 | テスト基準 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
成形収縮率., 平行 | 0.007 | mm/mm | ASTM D 955 |
機械的特性 | 値 | 単位 | テスト基準 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
降伏応力 | 55 | MPa | ASTM D 638 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
破壊応力 | 51 | MPa | ASTM D 638 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
破断伸び | 21 | % | ASTM D 638 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
曲げ弾性率 | 2160 | MPa | ASTM D 790 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ロックウェル硬度 | R 108 | - | ASTM D 785 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ノッチ付きIzod衝撃強さ, 1/8 in | 82 | J/m | ASTM D 256 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ノッチ付きIzod衝撃強さ, Low-Temperature | 66 | J/m | ASTM D 256 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
温度 | -40 | °C | - |
熱的特性 | 値 | 単位 | テスト基準 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DTUL @ 66 psi | 116 | °C | ASTM D 648 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DTUL @ 264 psi | 102 | °C | ASTM D 648 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ビカット軟化温度 | 131 | °C | ASTM D 1525 |
その他の特性. | 値 | 単位 | テスト基準 |
Biobased content | 48 | % | - |
吸水率, 24hr | 2.3 | % | ASTM D 570 |
密度 | 1230 | kg/m³ | ASTM D 792 |
Processing Recommendation Injection Molding | 値 | 単位 | テスト基準 |
Pre-drying - Temperature | 75 | °C | - |
Pre-drying - Time | 4 | h | - |
樹脂温度 | 260 | °C | - |
金型温度 | 85 | °C | - |
Injection speed | 30 | mm/s | - |
Maximum residence time | 4 | min | - |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.