Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Texin® 570D - (TPU+PC) - Covestro Deutschland AG

Material Data Center offers the following functions for Texin® 570D:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Texin datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
成形収縮率, 平行 0.8 % ISO 294-4, 2577
成形収縮率, 直角 0.8 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
曲げ弾性率, 23°C 700 MPa ISO 178
引張強度 40 MPa ISO 37
破壊ひずみ 130 % ISO 37
引裂強さ 158 kN/m ISO 34-1
ショア硬さD 70 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
ガラス転移点, 10ﾟC/min -35 °C ISO 11357-1/-2
荷重たわみ温度, 1.80 MPa 59 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 98 °C ISO 75-1/-2
ビカット軟化温度, A 139 °C ISO 306
その他の特性.値単位テスト基準
密度. 1210 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 110 - 121 °C -
Pre-drying - Time ≥4 h -
Processing humidity ≤0.03 % -
樹脂温度 232 - 238 °C -
金型温度 32 - 49 °C -
Zone 1 221 - 232 °C -
Zone 2 227 - 238 °C -
Zone 3 227 - 238 °C -
Nozzle temperature 227 - 241 °C -
Screw speed 40 - 80 rpm -
Injection pressure 69 - 103 MPa -
Processing Recommendation Extrusion値単位テスト基準
Pre-drying - Temperature 110 - 121 °C -
Pre-drying - Time ≥4 h -
Processing humidity ≤0.03 % -
樹脂温度 232 - 243 °C -
Feed temperature 221 - 243 °C -
Zone 1 216 - 232 °C -
Zone 2 216 - 238 °C -
Nozzle temperature 221 - 243 °C -
特殊な特性
成形加工法.
射出成形., Pipe/Tube Extrusion, 異形押出成形., シート押出成形., その他の押出成形., ブロー成形.
特殊な特性.
高耐衝撃及び耐衝撃改良.
な特性
Melt Strength
アプリケーション
自動車
領域別の利用可能性
北アメリカ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.