Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tarnamid® T-27 GF25 V0 - PA6-GF25 - Grupa Azoty S.A.

Material Data Center offers the following functions for Tarnamid® T-27 GF25 V0:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tarnamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 9000 / - MPa ISO 527
引張強度 140 / - MPa ISO 527
ノッチ付きシャルピー衝撃強さ, +23°C 7 / - kJ/m² ISO 179/1eA
Ball indentation hardness 210 / - MPa ISO 2039-1
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10゚C/min 221 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 190 / * °C ISO 75-1/-2
ビカット軟化温度, B 195 / * °C ISO 306
1.5mm厚さでの燃焼性 V-0 / * class IEC 60695-11-10
試験片の厚さ 1.6 / * mm -
特殊な特性
成形加工法.
射出成形.
納入形状.
顆粒., 黒, ナチュラルカラー
特殊な特性.
難燃.
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.