Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tarnamid® T-27 GF10GB20 - PA6-(GF+GB)30 - Grupa Azoty S.A.

Material Data Center offers the following functions for Tarnamid® T-27 GF10GB20:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tarnamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 40 / * cm³/10min ISO 1133
温度 275 / * °C -
荷重 5 / * kg -
成形収縮率, 平行 0.7 / * % ISO 294-4, 2577
成形収縮率, 直角 1.3 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 5800 / 3400 MPa ISO 527
引張強度 110 / 60 MPa ISO 527
破壊ひずみ 5 / 8 % ISO 527
曲げ弾性率, 23°C 4900 / 2600 MPa ISO 178
シャルピー衝撃強さ, +23°C 40 / 100 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30゚C 30 / 80 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C 3.5 / 7 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30゚C 3 / 5 kJ/m² ISO 179/1eA
ノッチ付きIzod衝撃強さ, +23°C 4 / 8 kJ/m² ISO 180/1A
Ball indentation hardness 210 / 95 MPa ISO 2039-1
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10゚C/min 221 / * °C ISO 11357-1/-3
荷重たわみ温度, 1.80 MPa 70 / * °C ISO 75-1/-2
ビカット軟化温度, B 210 / * °C ISO 306
線膨張係数, 平行 40 / * E-6/K ISO 11359-1/-2
線膨張係数, 直角 110 / * E-6/K ISO 11359-1/-2
厚さhでの燃焼性 HB / * class IEC 60695-11-10
試験片の厚さ 3.2 / * mm -
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 1MHz 3.7 / 4.7 - IEC 62631-2-1
誘電正接, 1MHz 160 / 1300 E-4 IEC 62631-2-1
体積抵抗率 1E13 / 1E10 Ohm*m IEC 62631-3-1
表面抵抗率 * / 1E11 Ohm IEC 62631-3-2
耐電圧 31 / 27 kV/mm IEC 60243-1
耐トラッキング性 525 / 525 - IEC 60112
その他の特性.乾燥/調湿単位テスト基準
密度. 1350 / - kg/m³ ISO 1183
特殊な特性
成形加工法.
射出成形.
納入形状.
顆粒., 黒, ナチュラルカラー
特殊な特性.
熱安定化.
アプリケーション
自動車, 建築構造, 電気電子
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.