Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of STYRON™ 686R - PS - Americas Styrenics LLC

Material Data Center offers the following functions for STYRON™ 686R:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Styron datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 2.4 g/10min ASTM D 1238
温度 200 °C -
荷重 5 kg -
成形収縮率., 平行 0.006 mm/mm ASTM D 955
機械的特性値単位テスト基準
ASTM数据
引張弾性率 3068 MPa ASTM D 638
引張強度 48.3 MPa ASTM D 638
破壊応力 48.3 MPa ASTM D 638
曲げ弾性率 3172 MPa ASTM D 790
曲げ強さ 82.7 MPa ASTM D 790
ロックウェル硬度 L107 - ASTM D 785
ノッチ付きIzod衝撃強さ, 1/8 in 21.4 J/m ASTM D 256
熱的特性値単位テスト基準
ASTM数据
線膨張係数, 平行 90 E-6/K ASTM D 696
DTUL @ 66 psi 97.8 °C ASTM D 648
DTUL @ 264 psi 89.4 °C ASTM D 648
ビカット軟化温度 108 °C ASTM D 1525
その他の特性.値単位テスト基準
密度 1040 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
金型温度 17 - 65 °C -
Zone 1 229 - 243 °C -
Zone 2 216 - 243 °C -
Zone 3 199 - 216 °C -
Nozzle temperature 229 - 243 °C -
Back pressure 0.172 - 1.48 MPa -
Processing Recommendation Extrusion値単位テスト基準
樹脂温度 193 - 232 °C -
Zone 1 177 - 193 °C -
Zone 2 182 - 204 °C -
Zone 3 188 - 210 °C -
Zone 4 199 - 216 °C -
Zone 5 204 - 221 °C -
Nozzle temperature 199 - 232 °C -
特殊な特性
成形加工法.
射出成形., その他の押出成形.
特殊な特性.
熱安定化.
Certifications
Food contact, Food approval FDA 21 CFR
領域別の利用可能性
北アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.